Xerox 4510/4510ps, 4505/4505ps manual Printing a

S e l e c t i n g a P a p e r S o u r c e

Printing a Page	When a print job is received by the printer, the sequence to
	select the paper tray for each page is as follows:
	1. Page size is established.
	If page size is not sent by the application, the PCL Menu
	setting called Paper Size is used.
	2. Paper source is established.
	If a paper source is sent by the application, it will be one
	of the six PCL paper sources listed in Figure 2.10
	(page 2-22).
	If paper source is not sent by the application, the PCL
	Menu setting called Default Source is used. Some
	software applications have a paper source called “Auto
	Select” or “Auto Sheet Feed.” When used, this results in
	a PCL paper source being omitted from the print job.
	3. When the printer is ready to print the page, tray sequence
	is established.
	For the paper source chosen in the second step above, a
	tray or sequence of trays is taken from the PCL Menu
	Source Mapping setting for that source. For settings, see
	Figure 2.11 (page 2-25).
	4. The printer searches in the tray or in any tray in the tray
	sequence for the correct page size from the first step
	above.
	In a tray sequence, the trays are searched left to right as
	they appear in the Source Mapping setting. For example,
	for sequence “Std-Low-MP”, the standard tray is
	searched first, the lower tray second, and the MP tray
	third. The MP paper size is taken from the PCL Menu
	setting called MP Tray Size.
	5. If a tray with the correct paper size is found, the page is
	printed from that tray.
	If no tray with the correct paper size is found, the tray
	sequence and paper size are displayed on the Control

C h a p t e r 2 : H a n d l i n g P a p e r ❖ 2-23