I n t e r f a c e M e n u

Ethernet Menu Options

The Ethernet Menu, a submenu of the Interface Menu, Figure 3.13 (page 3-38), contains options for configuring the printer’s Ethernet port, when the Ethernet option has been installed.

The Ethernet option supports the following protocols:

Novell NetWare, Version 3.11

TCP/IP

EtherTalk

DEC LAT

Microsoft LAN Manager

For detailed information on the supported protocols, refer to Networking: Ethernet packaged with the Ethernet option kit.

Figure 3.17 describes each Ethernet Menu option. Factory settings are boldfaced and followed by an asterisk (*). See “Setting a Menu Option” (page 3-10)for the steps to find and change a setting, or refer to the Document Services for Printing Guide to use the RUI to change settings.

Figure 3.17 Ethernet Menu options showing factory settings

Option

Setting

Description

 

 

 

Port Timeout

5-999 secs (30*)

Time interval for determining when to end an

 

 

incomplete print job and poll the next port in the

 

 

polling sequence.

 

 

Port Timeout works in conjunction with Auto Job

 

 

End (page 3-53).

 

 

See Appendix C: I/O Port Polling for more information

 

 

on how port polling works.

 

 

 

System Language

PCL*

Page description language (PDL) the printer will use

 

PostScript

for print jobs coming through the Ethernet port.

 

Appears only when the

When Lang. Sensing (page 3-52) is On, System

 

PostScript option is

Language is used only when the printer cannot

 

installed.

 

detect the PDL used in the incoming print job.

 

 

 

 

 

C h a p t e r 3 : U s i n g t h e C o n t r o l P a n e l 3-51

Page 97
Image 97
Xerox 4510/4510ps, 4505/4505ps manual Ethernet Menu Options