Xerox 4505/4505ps Std. Tray Empty, Std. Tray Out, Temp Font/Macro, Token Ring Fail, Toner Low

D i s p l a y e d C o n t r o l P a n e l M e s s a g e s

Figure 7.2 Control Panel messages (continued)

Message		Description/Action
Std. Tray Empty	The standard tray does not contain paper.
	ACTION: Add paper to the standard tray.
Std. Tray Out	The standard tray has been removed or is not properly inserted.
	ACTION: Insert the standard tray.
Temp Font/Macro	The printer was busy processing PCL data from a host system but the job was not
	completed since temporary fonts and macros were not deleted. The last page
	timeout has expired.
	This message appears until:
	• Another print job is received.
	• The Port Timeout expires and Auto Job End is On. See Chapter 3: Using the
	Control Panel, “Interface Menu” (page 3-37).
	ACTION: None
Test Print	A Test Print is being printed (for use by service technicians).
Printing...	The message clears once the printing is completed.
	ACTION: None
Token Ring Fail	The Token Ring card (XNIC-T’RING) has failed and cannot be used.
	ACTION: Press Enter	to allow the printer to continue as if the Token Ring
	card were not installed. This error is not subject to Auto Continue (page 3-59).
	Print a Configuration Sheet. If the sheet does not show Token Ring as present,
	contact your dealer or Xerox / Rank Xerox.
Toner Low	Toner is getting low in the EP cartridge, but printing will continue without
	interruption.
	ACTION: Replace the EP cartridge as soon as possible.
Turn Power Off	A fatal error has occurred.
Then On	ACTION: Power OFF [0], then ON [1].
Upper Card Err	Upper font card was removed while the printer was online.
Power Off & On	ACTION: Power OFF [0] the printer, then power it ON [1] to resume normal
	operations.

7-14❖ 4 5 0 5 / 4 5 0 5 p s o r 4 5 1 0 / 4 5 1 0 p s U s e r ’ s G u i d e