Xerox 4505/4505ps, 4510/4510ps manual Other pages of your document. Neither your software

S e l e c t i n g a P a p e r S o u r c e

Example 8	You do not have a lower base installed. You want to use
	pre-printed stationery for the first page and regular stock for
	the other pages of your document. Neither your software
	application nor your printer driver has the capability to ask
	for the first page of a document from a different source than
	the remainder of the document. It is assumed your
	pre-printed stationery is the same size as your regular stock.
	1.	Load the standard tray with regular paper stock.
	2.	Put one page of the pre-printed stationery in the MP tray
		(face down).
	3.	Set Source Mapping for “Standard” to “MP-Standard.”
	4.	Set MP Tray Size to the same size as your pre-printed
		stationery.
	5.	In your application, set paper source to Standard.
	The printer will pull the first page from the MP tray and all
	other pages from the standard tray.

Make sure there is one sheet of pre-printed stationery in the

MP tray each time you print this document.

2-34❖ 4 5 0 5 / 4 5 0 5 p s o r 4 5 1 0 / 4 5 1 0 p s U s e r ’ s G u i d e