Using the Menu System
1-88 ❖System Administrator Guide
IP Address
This item appears only if
IPAddress Res is set to Static.
Set the four byte IP address.
The available values are:
xxx.xxx.xxx.xxx
(where xxx = 000 to 255)
For this item (after Step 3), Item Up
moves the cursor to the right through
the displayed IP address and Item
Down moves the cursor to the left.
This allows you to change characters
within the string rather than having to
reenter the entire string.
With the cursor displayed under a
character, Value Up increments the
value of that character and Val ue
Down decrements the value.
1.Press Menu Up or Menu
Down until you see: Menus
Token Ring Menu
2.Press Item Up or Item Down
until you see: Token Ring Menu
IP Address
3.Press Value Up or Val ue D own .
You will see: IP Address =
xxx.xxx.xxx.xxx
4.Press Valu e Up or Va lue Down
to change the value of the
character above the cursor. The
value is incremented or
decremented by 1 each time
the key is pressed. Holding
down Value U p or Val ue
Down causes continuous
scrolling through the values.
IP Address =
xxx.xxx.xxx.xxx
5.To change other characters in
the IP address, press Item Up
or Item Down to scroll right or
left respectively through the
character string, then press
Value Up or Value Down to
change the value of the
character above the cursor (as
in Step 4).
IP Address =
xxx.xxx.xxx.xxx
6.When you have completed
setting the IP address, press
Enter. You will see:
Token Ring Menu
IP Address
7.Press Online. You will see: Ready
8.Restart printer or power off/on.
Table 1.25 Token Ring Menu Functions (continued)
Menu Item and Function Key strokes Display
Table1.25Page9 of 14