Using the Menu System
Chapter 1: Configuring the Printer ❖1-73
HTTP Enable
Enable or disable the Ethernet HTTP
Server protocol.
The available values are:
On*
Off
1.Press Menu Up or Menu
Down until you see: Menus
Ethernet Menu
2.Press Item Up or Item Down
until you see: Ethernet Menu
HTTP Enable
3.Press Valu e Up or Va lue Down
until you see: HTTP Enable =
New Value
4.Press Enter. You will see: Ethernet Menu
HTTP Enable
5.Press Online. You will see: Ready
IP Address Res.
Set the method used to resolve (Res)
the IP address, including sub net mask
and default gateway.
The available values are:
Static
BOOTP/RARP
DHCP*
1.Press Menu Up or Menu
Down until you see: Menus
Ethernet Menu
2.Press Item Up or Item Down
until you see: Ethernet Menu
IP Address Res.
3.Press Valu e Up or Va lue Down
until you see: IP Address Res.=
New Value
4.Press Enter. You will see: Ethernet Menu
IP Address Res.
5.Press Online. You will see: Ready
Table 1.23 Ethernet Menu Functions (continued)
Menu Item and Function Keystrokes Display
Table1.23Page8 of 12