Using the Menu System
1-30 ❖System Administrator Guide
Letterhead
Set the fuser temperature to be
associated with the paper type of
Letterhead.
The available values are:
Normal*
High
Low
This item appears only when the
Config Fuser item is set to On.
1.Press Menu Up or Menu Down
until you see: Menus
Tray Menu
2.Press Item Up or Item Down until
you see: Tray Menu
Letterhead
3.Press Value Up or Val ue D own until
you see: Letterhead =
New Value
4.Press Enter. You will see: Tray Menu
Letterhead
5.Press Online. You will see: Ready
Prepunched
Set the fuser temperature to be
associated with the paper type of
Prepunched.
The available values are:
Normal*
High
Low
This item appears only when the
Config Fuser item is set to On.
1.Press Menu Up or Menu Down
until you see: Menus
Tray Menu
2.Press Item Up or Item Down until
you see: Tray Menu
Prepunched
3.Press Value Up or Val ue D own until
you see: Prepunched =
New Value
4.Press Enter. You will see: Tray Menu
Prepunched
5.Press Online. You will see: Ready
Table 1.11 Tray Menu Functions (continued)
Menu Item and Function Keystrokes Display Reads
Table1.11Page7 of 10