Using the Menu System
Chapter 1: Configuring the Printer ❖1-99
Primary Server
Set the name of the Primary file server
(a name of 1 to 47 characters in
length).
The available characters are:
A - Z, 0 - 9, hyphen (-) and underscore (_)
The default is:
Null*
For this item (after Step 3), Item Up
moves the cursor to the right through
the displayed Primary Server name
and Item Down moves the cursor to
the left. This allows you to change
characters within the string rather
than having to reenter the entire
string.
With the cursor displayed under a
character, Value Up increments the
value of that character and Val ue
Down decrements the value.
1.Press Menu Up or Menu
Down until you see: Menus
Novell Menu
2.Press Item Up or Item Down
until you see: Novell Menu
Primary Server
3.Press Value Up or Val ue D own .
You will see: Primary Server =
xxx...xxx
4.Press Valu e Up or Va lue Down
to change the value of the
character above the cursor. The
value is incremented or
decremented by 1 each time
the key is pressed. Holding
down Value U p or Val ue
Down causes continuous
scrolling through the values.
Primary Server =
xxx...xxx
5.To change other characters in
the Primary Server name, press
Item Up or Item Down to
scroll right or left respectively
through the character string,
then press Value Up or Val ue
Down to change the value of
the character above the cursor
(as in Step 4).
Primary Server =
xxx...xxx
6.When you have completed
setting the Primary Server
name, press Enter. You will see:
Novell Menu
Primary Server
7.Press Online. You will see: Ready
Table 1.27 Novell Menu Functions (continued)
Menu Item and Function Key strokes Display
Table1.27Page5 of 7