Using the Menu System
Chapter 1: Configuring the Printer ❖1-49
Edge-to-Edge
Enable or disable edge to edge
printing for PCL jobs. The available
values are:
Off*
On
Control Panel settings for this
feature may be overridden by the
settings in the printer driver.
1.Press Menu Up or Menu
Down until you see: Menus
System Menu
2.Press Item Up or Item Down
until you see: System Menu
Edge-to-Edge
3.Press Valu e Up or Va lue Down
until you see: Edge-to-Edge =
New Value
4.Press Enter. You will see: System Menu
Edge-to-Edge
5.Press Online. You will see: Ready
XIE
Set the default Xerox Image
(resolution) Enhancement mode. The
available values are:
Off*
On
Functions only when Resolution is set
to 600 x 600 and Draft Mode is set to
Off.
1.Press Menu Up or Menu
Down until you see: Menus
System Menu
2.Press Item Up or Item Down
until you see: System Menu
XIE
3.Press Valu e Up or Va lue Down
until you see: XIE =
New Value
4.Press Enter. You will see: System Menu
XIE
5.Press Online. You will see: Ready
Table 1.15 System Menu Functions (continued)
Menu Item and Function Keystrokes Display
Table1.15Page7 of 11