Using the Menu System
Chapter 1: Configuring the Printer ❖1-47
Duplex
Enable or disable duplex printing for
PostScript and PCL jobs. The available
values are:
Off*
Long Edge
Short Edge
This item is only available when the
optional Duplex Module is installed.
For information on the use of Long
Edge and Short Edge printing, see the
section “Configuring Duplex Printing”
(page 1-122).
Control Panel settings for this
feature may be overridden by the
settings in the printer driver.
1.Press Menu Up or Menu Down
until you see: Menus
System Menu
2.Press Item Up or Item Down
until you see: System Menu
Duplex
3.Press Valu e Up or Val ue Dow n
until you see: Duplex =
New Value
4.Press Enter. You will see: System Menu
Duplex
5.Press Online. You will see:
Ready
Table 1.15 System Menu Functions (continued)
Menu Item and Function Keystrokes Display
Table1.15Page5 of 11