Configuring Custom Paper Sizes
Chapter 1: Configuring the Printer ❖1-125
Table 1.36 Custom Paper Size Examples.Custom Paper SizeDesired Input Source Required Steps8 x 10 in. Tray 1 1.In the application, format the page for Letter size paper, setting the
margins to correctly position the image on 8 x 10 in. paper if
overlaid by Letter size paper.
2.Load the 8 x 10 paper in Tray 1.
3.Set the Tray Menu Tray 1 M ode item to Custom.
4.Set the Custom Size item to Letter(8.5x11).
5.Set the Tra y Se quen ce item to a value that does not include Tray 1
(or set to Off).
6.Request Tray 1 as the paper source and send the print job.
6 x 7 in. multi bypass
feeder
1.In the application, format the page for Letter size paper, setting the
margins to correctly position the image on 6 x 7 in. paper if overlaid
by Letter size paper.
2.Load the 6 x 7 in paper in Tray 1.
3.Set the Tray Menu MBF Size item to Custom.
4.Set the Custom Size item to Letter (8.5x11”).
5.Set the Tray Sequ ence item to a value that does not include MBF
(or set to Off).
6.Request MBF as the paper source and send the print job.
8.5 x 11 in.
Short Edge
Feed (SEF)
Tray 1 1.In the application, format the page for Folio size paper (because Folio
is a short-edge feed size on this printer), setting the margins to
correctly position the image on the 11 inches to be used by this
paper.
2.Load the 8.5 x 11” paper into Tray 1 in the SEF direction. This
requires a Ledger/A3 size tray. The paper length guide will be set to
11 inches, rather than the width guide. (Set the width guide to 8.5”.)
3.Set the Tray Menu Tray 1 Mode to Custom.
4.Set the Custom Size to Folio (8.5 x13”).
5.Set the Tray Sequence item to value that does not include Tray 1 (or
set to Off).
6.Request Tray 1 as the paper source and send the print job .