Using the Menu System
Chapter 1: Configuring the Printer ❖1-67
LPR PDL
Set the default Page Description
Language emulation for the Ethernet
LPR protocol.
The available values are:
Auto*
PCL
PostScript
When set to Auto, the printer will
sense the PDL for each job and
automatically set the PDL accordingly.
1.Press Menu Up or Menu
Down until you see: Menus
Ethernet Menu
2.Press Item Up or Item Down
until you see: Ethernet Menu
LPR PDL
3.Press Valu e Up or Va lue Down
until you see: LPR PDL =
New Value
4.Press Enter. You will see: Ethernet Menu
LPR PDL
5.Press Online. You will see: Ready
LPR Binary PS
Enable or disable the LPR binary mode
of PostScript.
The available values are:
On
Off*
1.Press Menu Up or Menu
Down until you see: Menus
Ethernet Menu
2.Press Item Up or Item Down
until you see: Ethernet Menu
LPR Binary PS
3.Press Valu e Up or Va lue Down
until you see: LPR Binary PS =
New Value
4.Press Enter. You will see: Ethernet Menu
LPR Binary PS
5.Press Online. You will see: Ready
Table 1.23 Ethernet Menu Functions (continued)
Menu Item and Function Keystrokes Display
Table1.23Page2 of 12