Hard Disk Drive
6-42 ❖System Administrator Guide
5Remove the access cover by (1) pulling it out at the
bottom, (2) lifting it up slightly, then (3) pulling it away at
the top.
6Pull out gently on the hard drive and remove it from the
controller board.
You may need to rock it from side to side to free it
from the connector and the support posts.
7Replace the controller board’s access cover by (1) pushing
it in at the top, (2) sliding it down, and (3) aligning it with
the screw holes.
8Secure the access cover with its screws.
2
1
3
1
2
3