Control Panel Messages
Chapter 5: Troubleshooting ❖5-9
Lift/Extend MBF
Remove All Paper Part of a sequence of messages following an initial paper jam message. A
paper jam has occurred while feeding from the multi bypass feeder. Lift up
and pull out the multi bypass feeder tray and remove all paper, then refer
back to the Control Panel for further messages.
Load MBF
Size and Type
Load paper of the size and type shown into the multi bypass feeder.
Load Tray 1
Size and Type
Load paper of the size and type shown into Tray 1.
Load Tray 2
Size and Type
Load paper of the size and type shown into Tray 2.
Load Tray 3
Size and Type
Load paper of the size and type shown into Tray 3.
Low Paper–MBF
or
Low Paper–Tray
n
The amount of paper in the MBF or indicated tray is low and will soon
need to be replenished.
Maintenance Kit
Replace The fuser count has reached 200,000 sheets (at end of life). The printer will
continue to print, but over time print quality will deteriorate. Replace the
maintenance kit and reset the maintenance counter as per the instructions
provided in the kit.
Manual Feed
Size and Type
Load paper of the size and type shown into the multi bypass feeder.
Table 5.1 Control Panel Messages (continued)
Message Explanation/Corrective Action
Table5.1 Page5 of 10