Using the Menu System
Chapter 1: Configuring the Printer ❖1-65
Refer to Table1.23 on page 1-66 for step-by-step
instructions.
Ethernet Menu
(continued)
ETalk Enable Enables or disables the Ethernet EtherTalk protocol.
HTTP Enable Enables or disables the Ethernet HTTP Server protocol.
IP Address Res Sets the method used to resolve (Res) the IP address,
including sub net mask and default gateway.
IP Address Sets the four byte IP address. This item appears only if the IP
Address Res is set to static.
Sub Net Mask Sets the four byte Sub Net Mask address. This item appears
only if the IP Address Res is set to static.
Default Gateway Sets the four byte Default Gateway address. This item
appears only if the IP Address Res is set to static.
Port Timeout Sets the time for determining when to end an incomplete
print job and poll the next port in the polling sequence.
Speed Sets the speed of the 10/100 Ethernet interface and whether
half or full Ethernet.
Table 1.22 Ethernet Menu Items (continued)
Menu Description
Table1.22 Page2 of 2