Using the Menu System
Chapter 1: Configuring the Printer ❖1-111
Disk Initialize
Initialize the Hard Disk Drive. The
available values are:
Yes
No*
This function is ignored if the disk is
locked (write protected) via a PJL or
SNMP command.
1.Press Menu Up or Menu
Down until you see: Menus
Reset Menu
2.Press Item Up or Item Down
until you see: Reset Menu
Init Disk
3.Press Valu e Up or Va lue Down
until you see: Init Disk =
Yes
4.Press Enter. You will see: Reset Menu
Init Disk
5.Press Online. You will see: Ready
Disk Format
Format the Hard Disk Drive. The
available values are:
Yes
No*
This function is ignored if the disk is
locked (write protected) via a PJL or
SNMP command.
1.Press Menu Up or Menu
Down until you see: Menus
Reset Menu
2.Press Item Up or Item Down
until you see: Reset Menu
Disk Format
3.Press Valu e Up or Va lue Down
until you see: Disk Format =
Yes
4.Press Enter. You will see: Disk Format
Please Wait ...
5.When the formatting is
complete, you will see: Ready
Flash Format
Format flash memory. The available
values are:
Yes
No*
1.Press Menu Up or Menu
Down until you see: Menus
Reset Menu
2.Press Item Up or Item Down
until you see: Reset Menu
Flash Format
3.Press Valu e Up or Va lue Down
until you see: Flash Format =
Yes
4.Press Enter. You will see: Flash Format
Please Wait ...
5.When the formatting is
complete, you will see: Ready
Table 1.31 Reset Menu Functions (continued)
Menu Item and Function Keystrokes Display
Table1.31Page3 of 3