Using the Menu System
1-28 ❖System Administrator Guide
Tray N Mode
Determine whether or not to use
Tray N’s auto size detection
mechanism or Custom Size
settings. The available values are:
Auto*
Custom
1.Press Menu Up or Menu Down
until you see: Menus
Tray Menu
2.Press Item Up or Item Down until
you see: Tray Menu
Tray
N
Mode
3.Press Value Up or Val ue D own until
you see: Tray
N
Mode =
New Value
4.Press Enter. You will see: Tray Menu
Tray
N
Mode
5.Press On Line. You will see: Ready
Config Fuser
Enable the setting of fuser
temperatures associated with
each paper type (otherwise set
automatically by the printer).
The available values are:
On
Off*
When set to On, paper types are
available as menu items (see the
following items in this table).
1.Press Menu Up or Menu Down
until you see: Menus
Tray Menu
2.Press Item Up or Item Down until
you see: Tray Menu
Config Fuser
3.Press Value Up or Val ue D own until
you see: Config Fuser =
New Value
4.Press Enter. You will see: Tray Menu
Config Fuser
5.Press Online. You will see: Ready
Table 1.11 Tray Menu Functions (continued)
Menu Item and Function Keystrokes Display Reads
Table1.11Page5 of 10