Using the Menu System
Chapter 1: Configuring the Printer ❖1-75
Sub Net Mask
This item appears only if
IPAddress Res is set to Static.
Set the four byte Sub Net Mask
address.
The available values are:
xxx.xxx.xxx.xxx
(where xxx = 000 to 255)
For this item (after Step 3), Item Up
moves the cursor to the right through
the displayed Sub Net Mask address
and Item Down moves the cursor to
the left. This allows you to change
characters within the string rather
than having to reenter the entire
string.
1.Press Menu Up or Menu
Down until you see: Menus
Ethernet Menu
2.Press Item Up or Item Down
until you see: Ethernet Menu
Sub Net Mask
3.Press Value Up or Val ue D own .
You will see: Sub Net Mask =
xxx.xxx.xxx.xxx
4.Press Valu e Up or Va lue Down
to change the value of the
character above the cursor. The
value is incremented or
decremented by 1 each time
the key is pressed. Holding
down Value U p or Val ue
Down causes continuous
scrolling through the values.
Sub Net Mask =
xxx.xxx.xxx.xxx
5.To change other characters in
the Sub Net Mask address,
press Item Up or Item Down
to scroll right or left
respectively through the
character string, then press
Value Up or Value Down to
change the value of the
character above the cursor (as
in Step 4).
Sub Net Mask =
xxx.xxx.xxx.xxx
6.When you have completed
setting the Sub Net Mask
address, press Enter. You will
see:
Ethernet Menu
Sub Net Mask
7.Press Online. You will see: Ready
8.Restart printer or power off/on.
Table 1.23 Ethernet Menu Functions (continued)
Menu Item and Function Key strokes Display
Table1.23 Page10 of 12