Using the Menu System
Chapter 1: Configuring the Printer ❖1-53
Defaults
Sets default units. This is not changed
when a “Factory Default” is
performed.
The available values are:
• Inches (factory default for 110V
configuration)
• Millimeters (factory default for 220V
configuration)
The following defaults are affected by
changing this setting:
• System Menu>Paper Size
• PCL Menu>Form Length
• Tray Menu>MBF Size
• Tray Menu>Custom Size.
1.Press Menu Up or Menu
Down until you see: Menus
System Menu
2.Press Item Up or Item Down
until you see: System Menu
Defaults
3.Press Valu e Up or Va lue Down
until you see: Defaults =
New Value
4.Press Enter. You will see: System Menu
Defaults
5.Press Online. You will see: Ready
Table 1.15 System Menu Functions (continued)
Menu Item and Function Keystrokes Display
Table1.15 Page 11 of 11