Creatingi Plugl -ininCustom Voicesi

Basic Procedure

1 Press the [SOUND CREATOR] button.

2 Select "PLUG-IN VOICE."

Steps #3 - #5 (described in detail on page 106) are optional. Use these operations if you wish to edit the Board Custom Voices and the Native System Parameters on which the Plug- in Custom Voices are based.

6 Select a menu for editing the voice parameters via the panel operations.

Select an original voice.

The Custom Voice Creating mode makes it possible to create new voices by editing some parameters of the Plug-in Custom Voices. After selecting a voice, press the [EXIT] button to return back to this display.

7 Edit the voice parameters via the panel operations.

8 Store the edited voice to Flash ROM.

3 Select a menu for editing the Board Custom Voices on a computer, if necessary.

4 Edit the voice parameters on a computer. After completing edit- ing, use the Bulk Send operation to transfer the edited data from the computer to the board.

5 Execute the Board Custom Voice Backup oper- ation.

•See page 172 for details about connecting a com- puter. Please note that the MIDI A terminal (or the TO HOST terminal) should be used when editing the Board Custom Voices on a computer.

•When editing the Board Custom Voices using a computer, XGworks or XGworks lite and its Plug- in Editor Software are needed.

•When editing the Board Custom Voices, place check marks next to all the event types of MIDI Thru Filter in XGworks or XGworks lite. (Refer to the owner’s manual of XGworks or XGworks lite for details.)

Editing operations (corresponding to step #4 or #7) are covered in the following expla- nations.

Reference 101

99