Custom Voicei Creatingi

• FILTER RATE and FILTER LEVEL (Filter EG settings)

The FILTER RATE parameters are time-related; they determine how long it takes for the sound’s timbre to change from level to level (as set in FILTER LEVEL).

The FILTER LEVEL parameters are filter-related; they determine how much the sound changes in timbre over time (as set in FILTER RATE). A setting of “0” is the default value.

FILTER RATE

INITIAL

Sets the length of time the initial filter envelope level will be maintained. Higher values

 

 

correspond to shorter time.

 

DECAY1

Set the rate of variation between the initial filter envelope level and the levels set by the

 

DECAY2

FILTER LEVEL DECAY1, DECAY2, and DECAY3 parameters, respectively.

 

DECAY3

 

 

RELEASE

Sets the rate of variation from the offset at key-release to the offset set by the FILTER

 

 

LEVEL RELEASE parameter when SUSTAIN is off.

 

SUSTAIN

Sets the rate of variation from the offset at key-release to the offset set by the FILTER

 

 

LEVEL SUSTAIN parameter when SUSTAIN is on.

FILTER LEVEL

INITIAL

Sets the initial timbre of the envelope.

 

DECAY1

Set the amounts of timbre change following the elapsed time of DECAY 1, DECAY 2,

 

DECAY2

and DECAY 3, respectively.

 

DECAY3

 

 

SUSTAIN

When SUSTAIN is on, this sets the final timbre of the envelope; the filter setting chang-

 

 

es to this point (at the RELEASE rate) after the key is released.

●E3: FILTER

The 9000Pro features two independent filters. (For basic information about the filters, see page 93.)

Sets the amount of peak resonance applied to FILTER 1.

Higher values produce more resonant emphasis.

The TYPE parameters specifies the touch-sensitivity curve to be applied to the dynamic filters, and the SENS parameters sets the sensitivity of the filters to touch control. Higher values produce higher sensitivity.

Resets the currently selected EG parameters to their most basic settings.

Sets the cutoff frequency of Filter2.

Selects the type of Filter2.

Sets the cutoff frequency of Filter1.

Selects the type of Filter1.

Filter types

 

 

 

 

 

 

 

LPF (Low Pass Filter)

HPF (High Pass Filter)

 

 

Level

 

These frequencies are

Level

 

Cutoff range

Range passed

 

 

 

 

 

 

 

 

“passed” by the filter.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Frequency

 

 

 

Frequency

 

 

 

Cutoff frequency

 

 

Cutoff frequency

BPF (Band Pass Filter)

BEF (Band Elimination Filter)

Level

 

Cutoff range

Range passed Cutoff range

Level

 

Range passed Cutoff range Range passed

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Frequency

Frequency

Center frequency

Center frequency

Reference 97

95