Creatingi Plugl -ininCustom Voicesi
●E3: NATIVE PRM. (Native Part Parameter)
The word “native” here describes the parameters that are exclusive to each of the Plug-in Boards. Because of this, the editing screens displayed on the 9000Pro will differ depending on the particular Plug-in Board being used. For example, when editing Plug-in voices of the PLG150-DX, parameter names such as “Carrier” and “Modulator” which are unique to the FM Synthesis system are displayed, as shown below on the left. Likewise, when editing Plug-in voices of the PLG150-VL, the 9000Pro displays parameters unique to the VL tone generation system such as “Brth Mode” (Breath Mode) and “Emb CC No.” (Embouchure Control Change Number), as shown below on the right.
• When editing a DX plug-in voice: | • When editing a VL plug-in voice: |
Select the desired parameter. | Specify the value. |
For details about Native Part Parameters, refer to the Owner’s Manual of your Plug-in Board.
●VOICE SET
See page 163 for details about the Voice Set function.
You can specify the Voice Set data to the Plug-in Custom Voice.
104Reference