InstallingI lli Optionali l Hardware

Optional Plug-in Board Installation

A variety of optional Plug-in boards sold separately let you expand the voice library of your instrument. The following types of Plug-in boards can be used with your instrument.

• PLG150-AN

• PLG150-PF

• PLG100-VL

• PLG150-VL

• PLG100-DX

• PLG150-DX

• PLG100-XG

 

CAUTION

•When inserting Plug-in boards and connecting cables, make sure that you check that they are inserted and connected properly. Improperly inserted Plug-in boards and cables may cause faulty contacts and an electri- cal short circuit which may cause damage or result in a malfunction.

•After mounting the Plug-in board, be sure to tighten the screws as directed so it is completely stable and does not move in any way.

1 Turn the 9000Pro power off, and disconnect the AC power cord. Also, if the keyboard is connected with other external device(s), disconnect the device(s).

2 Turn the 9000Pro face down on a blanket or some soft sur- face, giving you direct access to the bottom of the instru- ment.

Plug-in board/Hard disk cover

3 Move to a position facing the front panel of the keyboard, and remove the eight screws from the Plug-in board/Hard disk cover with a Phillips screwdriver. Do not remove the other screws.

Black screws

•Keep the removed (8) screws in a safe place. They will be used when attaching the Plug- in board/Hard disk cover to the keyboard again.

Plug-in board/Hard disk cover

4 Remove the Plug-in board/Hard disk cover.

WARNING

•In order not to drop any screws inside the 9000Pro, keep the Plug-in Board and cover away from the 9000Pro in the following steps #5 - #7.

Reference 181

179