Starting Up

Use the following procedure to start up the 9000Pro.

1 Make sure that the POWER switch is in the OFF position.2 Securely plug the “female” end of theAC power cord supplied with the 9000Pro into the rear-panel AC cord socket.3 Plug the power cord into a convenient AC outlet.

To disconnect the AC power cord, set the POWER switch to OFF, then unplug the AC power cord from the AC outlet, and disconnect it from the 9000Pro AC INLET.

4 Make all necessary connections (pages 12 and 13), making sure first that all level controls on those devices are set to the minimum. (Refer to the owner’s manuals of the devices you are using for more information on connections.)

Since the 9000Pro has no built-in speakers, you need to monitor its sound output via external audio equipment. Alternatively, you could use a pair of headphones.

5 Turn the power ON. If you’ve connected any external devices to the 9000Pro, turn on the power of those devices in the following order:

WARNING

•Make sure your 9000Pro is rated for the AC voltage supplied in the area in which it is to be used (as listed on the rear panel). Connecting the unit to the wrong AC supply can cause serious damage to the internal circuitry and may even pose a shock hazard!

•Use only the AC power cord supplied with the 9000Pro. If the supplied cord is lost or dam- aged and needs to be replaced, contact your Yamaha dealer. The use of an inappropriate replace- ment can pose a fire and shock hazard!

•The type of AC power cord pro- vided with the 9000Pro may be different depending on the country in which it is purchased (a third prong may be provided for grounding purposes). Improper connection of the grounding conductor can create the risk of electrical shock. Do NOT modify the plug provided with the 9000Pro. If the plug will not fit the outlet, have a proper outlet installed by a qualified electrician. Do not use a plug adapter which defeats the grounding conductor.

z MIDI controller

x 9000Pro

c Audio equipment

Press the [POWER] switch. After a while, the main diaplay below appears.

When turning off the power, make sure that all level controls on those devices above are set to the minimum and simply reverse the above order.

6 Turn up the volume of the external audio equipment, as nec- essary.7 After the main display appears, play and adjust the volume.

14

12