MIDII I Functionsi

MFC10 Settings

Various functions can be assigned to an optional Yamaha MFC10 MIDI Foot Controller connected to the 9000Pro.

Connect the MFC10 to the MIDI B terminals and set the MIDI channel for the MFC10 messages by following the on-screen instructions.

The 9000Pro provides two ways to set: Easy Setup and Full Setup.

MFC10

9000Pro

MIDI OUTMIDI IN

 

MIDI cable

MIDI IN

MIDI OUT

•When the MIDI B terminals are connected to the MFC10, the functions of the MIDI B port are limited. For details, refer to the MIDI Data Format (page 228).

The explanations here apply to step #5 of the Basic Procedure on page 174.

■Easy Setup

Follow the on-screen instructions to call up the template display as shown below.

PAGE CONTROL

BACKNEXT

Select a template.

Press the [NEXT] button to enable the selected Easy Setup template. Disconnect the MIDI cable from the MIDI OUT B terminal and connect it to the MFC10 Foot Controller.

•When setting up the MFC10 from the 9000Pro, a MIDI cable must be connected from the MIDI OUT of the 9000Pro to the MIDI IN of the MFC10. However, you should discon- nect this cable when using the MFC10, since extraneous MIDI messages may be transmitted from the 9000Pro.

•To exit from the MFC10 play mode, select the MIDI Tem- plate display (page 174) and press the [CANCEL] LCD but- ton.

•The MFC10 play mode on/off status is retained in Flash ROM and is maintained even when the power is turned off.

178Reference

176