InstallingI lli Optionali l Hardware
5
6
Turn over the Plug-in board/Hard disk cover.This is the location for the Hard disk | |
unit. See page 184. | |
Plug-in board stand | |
Plug-in board/Hard disk cover | |
| Attach the Plug-in Board to the Plug-in board stand. ........................... | First board |
6-[1] Remove the four screws from the Plug-in stand with a Phillips | |
screwdriver. Do not remove the other screws. | |
Gold color screws
6-[2] Attach the Plug-in board to the the Plug-in board stand using the four screws removed in the previous step (6-[1]).
Gold color screws
Plug-in board | Plug-in board connector |
If you are installing a second board, go on to step #7 below. If you are installing only one board, go on to step #8.
7 As required, attach another Plug-in board to the Plug-in board stand. .... Second board
7-[1] Remove the four screws from the Plug-in stand and remove the Plug-in stand from the cover. Do not remove the other screws.
Gold color screws
7-[2] Attach another Plug-in board by turning over the Plug-in board stand and using the same operations in steps 6-[1] and 6-[2].
When turning over the board, let it rest on a soft surface.
Gold color screws
Plug-in board stand
7-[3] Attach the Plug-in board stand to the Plug-in board/Hard disk cover with the four screws removed in step 7-[1].
Gold color screws
Plug-in board/Hard disk cover Plug-in Board (second board)
Plug-in Board (first board)
182Reference
