The 9000Pro “Functions”i

●Footswitch1

●Footswitch2

This determines the functions of footswitches plugged into the rear-panel FOOT PEDAL SWITCH 1 and FOOT PEDAL SWITCH 2 jacks, and to which of the 9000Pro voices the foot- switches will apply.

Select one of the footswitch functions.

See below for details each function.

When the Sustain, Soste- nuto, Soft, Glide, Porta- mento, or DSP slow/fast type is selected, you can set the corresponding parts on or off as required.

Functions controlled by the footswitch

SUSTAIN

Standard sustain footswitch operation. When the footswitch is pressed notes played have a long sustain.

 

Releasing the footswitch immediately stops (damps) any sustained notes.

 

 

 

 

 

 

 

 

 

SOSTENUTO

If you play a note or chord on the keyboard and press the footswitch while the note(s) are held, those notes

 

will be sustained as long as the footswitch is held (as if the damper pedal had been pressed) but all subse-

 

quently played notes will not be sustained. This makes it possible to sustain a chord, for example, while

 

other notes are played “staccato.”

 

 

 

 

 

 

 

 

 

 

SOFT *

Pressing the footswitch subtly reduces the volume and slightly changes the timbre of notes played. The

 

SOFT effect only applies to certain voices — PIANO, for example.

 

 

 

 

 

 

 

 

 

GLIDE **

When the pedal is pressed the pitch drops a semitone, and then glides smoothly back to normal pitch when

 

the pedal is released.

 

 

 

 

 

 

 

 

 

 

PORTAMENTO

The portamento effect (a smooth slide between notes) can be produced while the pedal is pressed. Porta-

 

mento is produced when notes are played legato style (i.e., a note is played while the preceding note is still

 

held). The portamento time can be set via the Mixing Console display (page 145).

 

 

 

 

 

 

 

 

 

DSP SLOW/FAST

Same as the DSP [SLOW/FAST] button.

 

 

 

 

 

 

 

 

 

HARMONY/ECHO

Harmony occurs only while pedal is pressed.

 

 

 

 

 

 

 

 

 

VOCAL HARMONY

Same as the [V.H.(9)] button.

 

 

 

 

 

 

 

 

 

 

REGIST. +

Recall next highest (increment) registration. “1-1” is selected after “64-8”.

 

 

 

 

 

 

 

 

 

REGIST. –

Recall next lowest (decrement) registration. “64-8” is selected after “1-1”.

 

 

 

 

 

 

 

 

 

START/STOP

Same as the [START/STOP] button.

 

 

 

 

 

 

 

 

 

 

TAP TEMPO

Same as the [TAP TEMPO] button.

 

 

 

 

 

 

 

 

 

 

SYNCHRO STOP

Same as the [SYNC STOP] button.

 

 

 

 

 

 

 

 

 

 

INTRO 1

Same as the [INTRO I] button.

 

 

 

 

 

 

 

 

 

 

INTRO 2

Same as the [INTRO II] button.

 

 

 

 

 

 

 

 

 

 

INTRO 3

Same as the [INTRO III] button.

 

 

 

 

 

 

 

 

 

 

MAIN A

Same as the [MAIN VARIATION A] button.

 

 

 

 

 

 

 

 

 

MAIN B

Same as the [MAIN VARIATION B] button.

 

 

 

 

 

 

 

 

 

MAIN C

Same as the [MAIN VARIATION C] button.

 

 

 

 

 

 

 

 

 

MAIN D

Same as the [MAIN VARIATION D] button.

 

 

 

 

 

 

 

 

 

FILL DOWN

Same as the [FILL IN & BREAK

 

 

 

 

] button.

 

 

 

 

 

 

 

 

 

 

 

FILL SELF

Same as the [FILL IN & BREAK

 

 

 

] button.

 

 

 

 

 

 

 

 

 

 

 

 

FILL BREAK

Same as the [FILL IN & BREAK

 

 

 

] button.

 

 

 

 

 

 

 

 

 

 

 

FILL UP

Same as the [FILL IN & BREAK

 

 

] button.

 

 

 

 

 

 

 

 

 

 

ENDING 1

Same as the [ENDING/rit. I] button.

 

 

 

 

 

 

 

 

 

 

ENDING 2

Same as the [ENDING/rit. II] button.

 

 

 

 

 

 

 

 

 

 

ENDING 3

Same as the [ENDING/rit. III] button.

 

 

 

 

 

 

 

 

 

 

FADE IN/OUT

Same as the [FADE IN/OUT] button.

 

 

 

 

 

 

 

 

 

 

FING/ON BASS

The footswitch alternately switches between the Fingered and On Bass modes (page 70).

 

 

 

 

 

 

 

 

 

BASS HOLD

While the pedal is pressed, the Auto Accompaniment bass note will be held even if the chord is changed.

 

This function does not work in the Full Keyboard mode.

 

 

 

 

 

 

 

 

 

PERCUSSION

Footswitch plays a percussion instrument selected by the ASSIGN LCD buttons (the latter appears when

 

the Percussion type is selected).

 

 

 

 

 

 

 

 

 

 

160Reference

158