Using the Optional Plug-in Board

Reference on page 64

Plug-in Voice related buttons

Up to two boards can be installed to the bottom panel.

Installing an optional Plug-in Board to the 9000Pro lets you greatly expand the sonic palette of the instru- ment. Once you've installed an optional Plug-in Board to the 9000Pro, you have instant access to a whole new set of amazing, dynamic voices, in addition to the built-in voices of the 9000Pro.

Playing a Plug-in Voice

1 Install the Optional Plug-in Board to the 9000Pro.

See page 180 for installation instructions.

In this example, a PLG150-VL Virtual Acoustic Plug-in Board has been installed to SLOT 1. The PLG150-VL lets you expand the sonic palette of your 9000Pro by adding 256 dynamic VL voices (including 137 VL-XG voices), created with the unique Virtual Acoustic Synthesis system.

PLG150-VL

2 After you've installed the Plug-in Boards, turn the power ON.

When turning the power ON for the first time after installing the board, a message appears indicating that the board settings are being initialized, followed after a while by the main display.

Note that it takes a short amount of time before the main display appears, especially if two boards have been installed. If an error message appears, check that the board or boards have been properly installed to the 9000Pro.

3 After the main display appears, insert the "Plug-in Custom Voice" disk supplied with the 9000Pro and load the file "150VL CsVce.xvc" to the 9000Pro via the Plug-in Manager function. See page 66 for details.

4 Press the [R1] LCD button to turn the RIGHT1 part on.

F

 

 

 

 

G

 

 

 

 

H

 

PART SELECT

 

 

 

 

 

 

I

 

 

 

 

LEFT HOLD

LEFT

RIGHT1

RIGHT2

RIGHT3

J

 

 

 

 

 

LOWER

 

UPPER

 

PART ON/OFF

42

40