Song Creator

6 7

Press the [NEXT] button.

Set up for recording.

•Select the required voice(s), select a style, if required. Set up all parameters as desired for recording.

•Turn the metronome on or off as required.

•Pressing the [REHEARSAL] LCD button before recording lets you practice the part to be recorded. This is particularly convenient for mastering parts for punch-in recording — before you actually record them.

 

 

F

 

 

 

G

 

PAGE CONTROL

 

Turn the metronome

 

 

 

 

 

H

on or off as required.

BACK

NEXT

 

 

 

I

J

8 Start recording.

You can start recording with one of the following ways:

•Press the [START/STOP] button to start the rhythm parts of the accompa- niment and recording at the same time.

•Press the [SYNC START] button to enable synchronized standby, then play a key on the left side of the split point to start the accompaniment and recording at the same time.

•Press the [SYNC START] button to enable synchronized standby.

1)Play a key on the right side of the split point to start recording.

2)Play a key on the left side of the split point to start the accompaniment.

9 Stop recording.

When you finish playing, press the [START/STOP] button.

If you have set the accompaniment tracks to REC in step #5 above, you can stop recording by pressing the [ENDING] button. If you press the [ENDING] button, recording will stop automatically after the ending section has finished.

•If one of the TR11~16 is set to "REC" in step #5, you can start recording your keyboard per- formance first and then start recording the Auto Accompani- ment or rhythm.

To do this,

1)Press the [RUBATO] LCD button.

2)Play a key on the right side of the split point to start recording your keyboard performance.

3)Play a chord on the left side of the split point to start recording the Auto Accom- paniment with your key- board performance.

•Using Registration Memory (page 28), One Touch Setting (page 24), and Music Data- base (page 26) can make your recording sessions much more efficient, since various settings (such as voices, etc.) can be recalled by a single button press.

10 Press the [START/STOP] button to hear your newly recorded performance.

Repeat step #5 - #9 as needed.

11 Save the recorded data to the disk.

Insert a blank recordable disk into the disk drive, and follow the instructions in the illustration below.

PAGE CONTROL

BACKNEXT

Press this button to execute the save oper- ation.

CAUTION

•While the file is being saved, never eject the floppy disk or turn the power off.

CAUTION

•Please note that the recorded data will be lost if exiting from the Record mode without saving the data to disk.

12 Press the [EXIT] button to exit from the Record mode.

39

37