Yamaha 9000 Pro, professional workstation 79

Diski Song Playbackl

Other Functions: Viewing the Lyrics and Fast Forward/Reverse

Select this to call up the Lyrics display.

Select this during playback to move rapidly forward through the song.

Select this during playback to move rapidly backward through the song.

This button lets you pause playback and then start again from the same point in the song.

Song Setup

This function determines certain playback settings for song data other than note on/off (for example, lyrics).

•When set to SEARCH ON, the 9000Pro reads the lyric data when the song is selected, allowing the lyrics to be dis- played immediately after you press the [START/STOP] button.

•When set to SEARCH OFF, the 9000Pro reads the lyric data after playback is started. This may result in a slight delay before the lyrics are displayed.

•When set to NEVER DISPLAY, the lyrics will not be shown in the LCD display dur- ing playback.

When the Ultra Quick Start function here is set to ON, the 9000Pro reads all initial non-note data of the song at the highest possible speed, then automatically slows down to the appropriate tempo at the ﬁrst note of the song. This allows you to start actual song playback as quickly as possi- ble, with a minimum pause for reading of data.

Press this button to save the microphone and Vocal Harmony settings to the selected song.

See below for details.

■About Vocal Harmony/Microphone Settings for a Song

The Vocal Harmony and Microphone settings can be stored as Song Setup data. When using the Vocal Harmony function with a song, this convenient feature lets you store all relevant Vocal Harmony and Microphone settings with the song, so that they are automatically called up the next time you select the song. The actual settings that can be stored are listed below.

• Vocal Harmony type and parameter settings............................................................		Page 81
• Vocal Harmony Vocoder track settings (keyboard and song) ...................................		Page 82
•	Effect type and parameter settings (for the microphone sound)............................	Page 146
•	Volume, Pan, Reverb depth, Chorus depth and
	DSP (8) depth (for the microphone sound).............................................................	Page 145

•You can use the metronome function during playback. See page 166 for details.

Reference 79

77

Contents

Page Page Page PLEASE READ CAREFULLY BEFORE PROCEEDING WARNING CAUTION Using the Floppy Disk Drive (FDD) and Floppy Disks Panel logos Page Contents Page Top Panel & Connections Page Rear Panel & Connections Page Starting Up Lamp 1 Make sure that the POWER switch is off Playing Voices Try out some of these other voices 1 Press the PART ON/OFF [LEFT] button to turn the LEFT part ON Try out the preset Organ Flutes voices Auto Accompaniment Try out some of the other styles ■Metronome and Bass Chord Hold 1 - 4 Use the same operations as in “Using Auto Accompani- ment.” 5 Press any of the [INTRO] buttons 8 Press any of the [ENDING] buttons ■Accompaniment Structure Diagram Select a style Press one of the [ONE TOUCH SETTING] buttons As soon as you play a chord with your left hand, the auto accompaniment starts Play melodies with your right hand and play various chords Auto Accompaniment ■About the Style Data Music Database Music Database 2 Press the LCD [F] button to call up the Search display 3 Select a category and set the tempo range 4 Press the LCD [I] button to execute the Search operation Registration Memory ■The Freeze function ■Bank View Registration Memory 1 Set up the panel controls as required 2 Select a Registration Bank (04 through 64) 3 Press the [MEMORY] button 4 Press one of the REGISTRATION MEMORY buttons: [1] through [8] Disk Song Playback Disk Song Playback 5 Start playback 6 Turn individual tracks ON or OFF (muted) as required 7 Adjust the volume as required 8 Stop playback Vocal Harmony Press the VOCAL HARMONY [SELECT] button Vocal Harmony 4 Select a Vocal Harmony type 5 Play the keyboard while singing into the microphone 1-4 Use the same operation as in “Playback of Song Disks” on page 5 Turn the Vocal Harmony effect on and select a Vocal Harmony type (see above) The Multi Pads Voice Effects Try out Harmony/Echo with some of the voices below Song Creator Press the [NEXT] button Set up for recording 8 Start recording 9 Stop recording 10 Press the [START/STOP] button to hear your newly recorded performance 3 Select “NEW SONG.” 4 Select “MULTI TRACK RECORD.” Page Sampling Sampling 12 Press the LCD [STOP] button to stop the sampling 13 Store voice parameters for the recorded sample as a Custom voice 14 Press the [EXIT] button several times to exit from the Sampling mode 15 Select the Custom voice number above and play the voice from the keyboard Using the Optional Plug-inBoard ■Plug-inVoices and Board Voices Display-basedControls Page Page Page Page ■Direct Access Chart Function Tree Page Page Page Memory Structure ■About System Backup ■About the Plug-inVoice Data Demonstration Voices Page Page Page Page Organ Flutes Page Plug-inVoices Page Page Page Page Page Auto Accompaniment Chord Types Recognized in the Fingered Mode Press the [FADE IN/OUT] button so that its indicator lights Start the accompaniment 1 Turn AUTO ACCOMPANIMENT on. 2 Turn SYNC STOP on 6 Stop the auto accompaniment Set up the panel controls as required Press the [MEMORY] button and press one of the [ONE TOUCH SETTING] buttons: [1] through [4] Page Page Music Database The Multi Pads Disk Song Playback Page Vocal Harmony Page Page Page Sampling Page Page Page Page Page Page Page Custom Voice Creating Page Page Page Page Page Page Page Creating Plug-inCustom Voices Page Page Page Page Page 1 Connect your personal computer to the 9000Pro 2 Install the software to the computer 4 Load the appropriate ﬁles to both the 9000Pro and your com- puter 5 Use the same operation as in Steps #1 - #5 of the "Basic Pro cedure" on page 101, paying attention to the following points 7 Save the edited voice to a disk via the Plug-inManager function (page 68) 8 Save the edited voice to the PC Troubleshooting when using the Plug-inBoards Page Song Creator Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Style Creator Page Page Page Page Page Page Page Page Page Page Page ■Connections ■Creating the Data Page Page Multi Pad Creator Page Page Mixing Console Page Page Page Page Page Disk/SCSI Operations Basic Operation — Directory/File Selection Page Page Page Page Page Page The 9000Pro “Functions” Page Page Page Page Page Page Page Page Page MIDI Functions Page What You Can Do With MIDI MIDI Data Compatibility Connecting to a Personal Computer Page Page Page MIDI Receive Mode Page Page Page Installing Optional Hardware 4 Remove the Plug-inboard/Hard disk cover Turn over the Plug-inboard/Hard disk cover Attach the Plug-inBoard to the Plug-inboard stand 10 Attach the Plug-inboard/Hard disk cover to the 9000Pro 11 Check that the installed Plug-inboard is functioning properly 5 Remove the four screws from the Plug-inboard/Hard disk cover 6 Turn over the Plug-inboard/Hard disk cover 9 Turn the cover over again, and attach the cable connector as shown 10 Attach the Plug-inboard/Hard disk cover to the 9000Pro (page 183) 11 Check that the installed hard disk is functioning properly Remove the SIMM cover Insert the SIMMs in the SIMM slots as described below 6 Replace the SIMM cover and attach it to the 9000Pro with the six screws 7 Check that the installed SIMMs are functioning properly Troubleshooting Page Index Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Channel/Mode/Realtime Messages Kanal / Modus / Realtime-Meldungen Messages canal/de mode/temps ré el Page System Exclusive Messages Systemexklusive Meldungen Messages exclusifs au systè me Page Page Page MIDI Parameter Change Table Page Page Page Page Page Page Page Functions of the MIDI B Port when Connected to the MFC10 Funktionen des MIDI B Ports bei Verbindung mit dem MFC10 Fonctions du port MIDI B lors de la connexion au MFC10