Yamaha 9000 Pro, professional workstation 134

Stylele Creator

Style Editing (Full Edit)

This section explains various parameters, other than the basic ones.

The explanations here apply to step #5 of the Basic Procedure on page 128.

■Setup

Select the desired menu.

●Voice

This function can be used to change the voices assigned to any of the current style’s parts. While the SETUP display is selected, all other available parameters can be modiﬁed as required via the MIXING CONSOLE displays.

●Setup Copy

Instead of starting with all the sections and/or parts from the selected original style, you can copy speciﬁc parts from other sections/parts of the same style, or from other styles as required.

■Edit

Select the desired menu.

•Quantize ........................... Refer to page 114.

•Velocity Change ................ Boosts or cuts the velocity of all notes in the speciﬁed part by the speciﬁed per- centage.

•Measure Copy................... This function allows data to be copied from one measure or group of measures to another location within the same part.

Use the TOP and LAST LCD buttons to specify the ﬁrst and last measures in the region to be copied. Use the DEST LCD button to specify the top of the measure to which the data is to be copied.

If the copy destination falls outside the number of measures actually in the part, the corresponding source measures will not be copied.

•Measure Clear .................. This function clears all data from the speciﬁed range of measures within the speciﬁed part. Use the TOP and LAST LCD buttons to specify the ﬁrst and last measures in the range to be cleared.

•Remove Control Event ...... This function can be used to remove all occurrences of a speciﬁed type of con- trol event from a speciﬁed part. Use the EVENT LCD buttons to select the type of event to be removed.

•Remove Duplicate Notes .. Removes all duplicate notes from a speciﬁed part.

134Reference

132

Contents

Page Page Page PLEASE READ CAREFULLY BEFORE PROCEEDING WARNING CAUTION Using the Floppy Disk Drive (FDD) and Floppy Disks Panel logos Page Contents Page Top Panel & Connections Page Rear Panel & Connections Page Starting Up Lamp 1 Make sure that the POWER switch is off Playing Voices Try out some of these other voices 1 Press the PART ON/OFF [LEFT] button to turn the LEFT part ON Try out the preset Organ Flutes voices Auto Accompaniment Try out some of the other styles ■Metronome and Bass Chord Hold 1 - 4 Use the same operations as in “Using Auto Accompani- ment.” 5 Press any of the [INTRO] buttons 8 Press any of the [ENDING] buttons ■Accompaniment Structure Diagram Select a style Press one of the [ONE TOUCH SETTING] buttons As soon as you play a chord with your left hand, the auto accompaniment starts Play melodies with your right hand and play various chords Auto Accompaniment ■About the Style Data Music Database Music Database 2 Press the LCD [F] button to call up the Search display 3 Select a category and set the tempo range 4 Press the LCD [I] button to execute the Search operation Registration Memory ■The Freeze function ■Bank View Registration Memory 1 Set up the panel controls as required 2 Select a Registration Bank (04 through 64) 3 Press the [MEMORY] button 4 Press one of the REGISTRATION MEMORY buttons: [1] through [8] Disk Song Playback Disk Song Playback 5 Start playback 6 Turn individual tracks ON or OFF (muted) as required 7 Adjust the volume as required 8 Stop playback Vocal Harmony Press the VOCAL HARMONY [SELECT] button Vocal Harmony 4 Select a Vocal Harmony type 5 Play the keyboard while singing into the microphone 1-4 Use the same operation as in “Playback of Song Disks” on page 5 Turn the Vocal Harmony effect on and select a Vocal Harmony type (see above) The Multi Pads Voice Effects Try out Harmony/Echo with some of the voices below Song Creator Press the [NEXT] button Set up for recording 8 Start recording 9 Stop recording 10 Press the [START/STOP] button to hear your newly recorded performance 3 Select “NEW SONG.” 4 Select “MULTI TRACK RECORD.” Page Sampling Sampling 12 Press the LCD [STOP] button to stop the sampling 13 Store voice parameters for the recorded sample as a Custom voice 14 Press the [EXIT] button several times to exit from the Sampling mode 15 Select the Custom voice number above and play the voice from the keyboard Using the Optional Plug-inBoard ■Plug-inVoices and Board Voices Display-basedControls Page Page Page Page ■Direct Access Chart Function Tree Page Page Page Memory Structure ■About System Backup ■About the Plug-inVoice Data Demonstration Voices Page Page Page Page Organ Flutes Page Plug-inVoices Page Page Page Page Page Auto Accompaniment Chord Types Recognized in the Fingered Mode Press the [FADE IN/OUT] button so that its indicator lights Start the accompaniment 1 Turn AUTO ACCOMPANIMENT on. 2 Turn SYNC STOP on 6 Stop the auto accompaniment Set up the panel controls as required Press the [MEMORY] button and press one of the [ONE TOUCH SETTING] buttons: [1] through [4] Page Page Music Database The Multi Pads Disk Song Playback Page Vocal Harmony Page Page Page Sampling Page Page Page Page Page Page Page Custom Voice Creating Page Page Page Page Page Page Page Creating Plug-inCustom Voices Page Page Page Page Page 1 Connect your personal computer to the 9000Pro 2 Install the software to the computer 4 Load the appropriate ﬁles to both the 9000Pro and your com- puter 5 Use the same operation as in Steps #1 - #5 of the "Basic Pro cedure" on page 101, paying attention to the following points 7 Save the edited voice to a disk via the Plug-inManager function (page 68) 8 Save the edited voice to the PC Troubleshooting when using the Plug-inBoards Page Song Creator Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Style Creator Page Page Page Page Page Page Page Page Page Page Page ■Connections ■Creating the Data Page Page Multi Pad Creator Page Page Mixing Console Page Page Page Page Page Disk/SCSI Operations Basic Operation — Directory/File Selection Page Page Page Page Page Page The 9000Pro “Functions” Page Page Page Page Page Page Page Page Page MIDI Functions Page What You Can Do With MIDI MIDI Data Compatibility Connecting to a Personal Computer Page Page Page MIDI Receive Mode Page Page Page Installing Optional Hardware 4 Remove the Plug-inboard/Hard disk cover Turn over the Plug-inboard/Hard disk cover Attach the Plug-inBoard to the Plug-inboard stand 10 Attach the Plug-inboard/Hard disk cover to the 9000Pro 11 Check that the installed Plug-inboard is functioning properly 5 Remove the four screws from the Plug-inboard/Hard disk cover 6 Turn over the Plug-inboard/Hard disk cover 9 Turn the cover over again, and attach the cable connector as shown 10 Attach the Plug-inboard/Hard disk cover to the 9000Pro (page 183) 11 Check that the installed hard disk is functioning properly Remove the SIMM cover Insert the SIMMs in the SIMM slots as described below 6 Replace the SIMM cover and attach it to the 9000Pro with the six screws 7 Check that the installed SIMMs are functioning properly Troubleshooting Page Index Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Channel/Mode/Realtime Messages Kanal / Modus / Realtime-Meldungen Messages canal/de mode/temps ré el Page System Exclusive Messages Systemexklusive Meldungen Messages exclusifs au systè me Page Page Page MIDI Parameter Change Table Page Page Page Page Page Page Page Functions of the MIDI B Port when Connected to the MFC10 Funktionen des MIDI B Ports bei Verbindung mit dem MFC10 Fonctions du port MIDI B lors de la connexion au MFC10