A template which is handy for creating style data is included on the supplied floppy disk (TEM- PLATE.MID).
•The Initial Setup area from 12000 through 14479 is used for voice and effect settings. Do not include note event data.
•The Main A data begins at 21000. Any number of mea- sures from 1 to 255 can be used. All measures must have one of the following time signatures: 2/4, 3/4, 4/4, or 5/4.
•Fill In AA begins from the top of the measure following the last measure of the Main A pattern. In the chart this is 4100, but this is only an example and the actual timing will depend on the length of Main A. Please note that all Fill Ins can be only 1 measure in length (refer to the Sec- tion/Length chart below).
Section | Length |
Intro | 255 measures max. |
Main | 255 measures max. |
Fill In | 1 measure |
Ending | 255 measures max. |
•The following charts indicate the valid MIDI events for both the Initial Setup data and the Pattern data. Make sure to NOT enter any events marked with a dash
(— ), nor any events not listed here.
Channel Message
Event | Initial | Source |
| Setup | Pattern |
Note Off | — | OK |
Note On | — | OK |
Program Change | OK | OK |
Pitch Bend | OK | OK |
Control#0 (Bank Select MSB) | OK | OK |
Control#1 (Modulation) | OK | OK |
Control#6 (Data Entry MSB) | OK | — |
Control#7 (Master Volume) | OK | OK |
Control#10 (Pan) | OK | OK |
Control#11 (Expression) | OK | OK |
Control#32 (Bank Select LSB) | OK | OK |
Control#38 (Data Entry LSB) | OK | — |
Control#71 (Harmonic Content) | OK | OK |
Control#72 (Release Time) | OK | — |
Control#73 (Attack Time) | OK | — |
Control#74 (Brightness) | OK | OK |
Control#84 (Portamento Control) | — | OK |
Control#91 (Reverb Send Level) | OK | OK |
Control#93 (Chorus Send Level) | OK | OK |
Control#94 (Variation Send Level) | OK | OK |
Control#98 (NRPN LSB) | OK | — |
Control#99 (NRPN MSB) | OK | — |
Control#100 (RPN LSB) | OK | — |
Control#101 (RPN MSB) | OK | — |
Stylele Creator
RPN & NRPN
Event | Initial | Source |
| Setup | Pattern |
RPN (Pitch Bend Sensitivity) | OK | — |
RPN (Fine Tuning) | OK | — |
RPN (Null) | OK | — |
NRPN (Vibrato Rate) | OK | — |
NRPN (Vibrato Delay) | OK | — |
NRPN (EG Decay Time) | OK | — |
NRPN (Drum Filter Cutoff Frequency) | OK | — |
NRPN (Drum Filter Resonance) | OK | — |
NRPN (Drum EG Attack Time) | OK | — |
NRPN (Drum EG Decay Time) | OK | — |
NRPN (Drum Instrument Pitch Coarse) | OK | — |
NRPN (Drum Instrument Pitch Fine) | OK | — |
NRPN (Drum Instrument Level) | OK | — |
NRPN (Drum Instrument Pan) | OK | — |
NRPN (Drum Instrument Reverb Send Level) | OK | — |
NRPN (Drum Instrument Chorus Send Level) | OK | — |
NRPN (Drum Instrument Variation Send Level) | OK | — |
System Exclusive
Event | Initial | Source |
| Setup | Pattern |
Sys/Ex GM on | OK | — |
Sys/Ex XG on | OK | — |
Sys Ex XG Parameter Change (Effect1) | OK | — |
Sys Ex XG Parameter Change (Multi Part) | — | — |
DRY LEVEL | OK | OK |
Sys Ex XG Parameter Change (Drum Setup) | — | — |
PITCH COARSE | OK | — |
PITCH FINE | OK | — |
LEVEL | OK | — |
PAN | OK | — |
REVERB SEND | OK | — |
CHORUS SEND | OK | — |
VARIATION SEND | OK | — |
FILTER CUTOFF FREQUENCY | OK | — |
FILTER RESONANCE | OK | — |
EG ATTACK | OK | — |
EG DECAY1 | OK | — |
EG DECAY2 | OK | — |
Reference 139
137