6 7
Song Creator
Press the [NEXT] button.Set up for recording.•Select the required voice(s), select a style, if required. Set up all parameters as desired for recording.
•Turn the metronome on or off as required.
|
| F |
PAGE CONTROL | G | |
BACK | NEXT | H |
I
J
• If ACMP is set to "REC" in step |
#5, you can start recording |
your keyboard performance |
first and then start recording |
the Auto Accompaniment or |
rhythm. |
To do this, |
1) Press the [RUBATO] LCD |
button. |
2) Play a key on the right side |
of the split point to start |
Turn the metronome on or off as required.
recording your keyboard |
performance. |
3) Play a chord on the left side |
of the split point to start |
Recording starts as soon as you play a key on the keyboard.
9 Stop recording.When you finish playing, press the [START/STOP] button.
If you have set ACMP track to REC in step #5 above, you can stop recording by pressing the [ENDING] button. If you press the [ENDING] button, recording will stop automatically after the ending section has finished.
10 Press the [START/STOP] button to hear your newly recorded performance.recording the Auto Accom- |
paniment with your key- |
board performance. |
• Using Registration Memory |
(page 28), One Touch Setting |
(page 24), and Music Data- |
base (page 26) can make your |
recording sessions much more |
efficient, since various settings |
(such as voices, etc.) can be |
recalled by a single button |
press. |
CAUTION
•While the file is being saved, never eject the floppy disk or turn the power off.
Insert a blank recordable disk into the disk drive, and follow the instructions in the illustrations below.
CAUTION
•Please note that the recorded data will be lost if exiting from the Record mode without saving the data to disk.
PAGE CONTROL
BACKNEXT
PAGE CONTROL
BACKNEXT
Input a file name.
PAGE CONTROL
BACKNEXT
The LCD display will prompt you to save the recorded data.
At the prompt, select “YES” to save the recorded data.
12 Press the [EXIT] button to exit from the Record mode.37
35