Sampling

11 Press the LCD [START] button and speak into the microphone to start the sampling.

Sampling starts when the input level reaches the Auto Trigger level (page 84).

Indicates the amount of remaining sampling memory/time.

12 Press the LCD [STOP] button to stop the sampling.

Sampling will stop automatically when the available wave memory is full, so be sure to press LCD [STOP] button as soon as the sound you want to sample is recorded, otherwise you’ll end up sampling unwanted silence (which can be edited out later).

13 Store voice parameters for the recorded sample as a Custom voice.

1) Follow the instructions in the chart below.

A

 

 

 

 

B

 

 

 

 

C

 

 

 

 

D

PAGE CONTROL

PAGE CONTROL

 

E

 

 

 

 

 

BACK

NEXT

BACK

NEXT

Select “STORE.”

Select a Custom voice

Input a voice name.

 

number (destination).

 

2)Press the [NEXT] button to store the voice parameters for the recorded sample as Custom voice.

14 Press the [EXIT] button several times to exit from the Sampling mode.15 Select the Custom voice number above and play the voice from the keyboard.16 Save the recorded sample (wave data) to disk.

1)Press the [DISK/SCSI] button to call up the Save display.

2)Select “SAVE TO DISK.”

3)Call up the Custom Voice display and select the number stored in step #13.

4)Save the selected Custom Voice with the sample (wave data) to disk.

41

39