The Dump Out Function

The Dump Out function allows VL70-m setup and system exclusive data to be transmitted to a second VL70-m or an external MIDI storage device such as the Yamaha MDF2 MIDI Data Filer via the MID OUT or TO HOST connec-

tor.

■NOTES

•The MIDI Device Number of the receiving device must the same as that set via the VL70- m PLAY mode “DevNo.” parameter (pages 32 and 41).

•You might have to try a few different DumpIntrval parameter (page 99) settings before the receiving device will receive the data from the VL70-m without errors.

●DUMPOUT Operation

When the DUMPOUT sub-mode is selected from the UTILITY mode menu, a second menu appears which allows you to choose the type of data to be trans- mitted: SYSTEM, CURRENT, CUSTOM, or INTERNL. From this menu:

1.Select a Data Type

Use the SELECT [<] and [>] buttons to select SYSTEM, CURRENT, CUSTOM, or INTERNL. The icon to the left of the name of the selected data type will flash when selected.

 

SYSTEM

All “system” data, including system setup and breath setting

 

 

data.

 

 

 

 

 

CURRENT

Transmits the currently selected voice (i.e. the voice that was

 

 

selected immediately prior to engaging the UTILITY mode).

 

 

 

 

 

CUSTOM

Transmits all 6 CUSTOM bank voices, or a single specified

 

 

CUSTOM bank voice. When “ALL” is selected all 6 CUSTOM

 

 

voices are transmitted, and when “C1” through “C6” is selected

 

 

the corresponding single CUSTOM voice is transmitted.

 

 

 

 

 

INTERNL

Transmits all 64 INTERNAL bank voices, or a single specified

 

 

INTERNAL bank voice. When “ALL” is selected all 64 INTERNAL

 

 

voices are transmitted, and when “I01” through “I64” is selected

 

 

the corresponding single INTERNAL voice is transmitted.

 

 

 

 

100 The Utility Mode