RevSend (Reverb Send)

Settings: 000 … 127

Adjusts the level of the signal sent to the VL70-m reverb effect stage. The higher the value, the higher the level of the reverb send signal.

ChoSend (Chorus Send)

Settings: 000 … 127

Adjusts the level of the signal sent to the VL70-m chorus effect stage. The higher the value, the higher the level of the chorus send signal.

VarSend (Variation Send)

Settings: 000 … 127 (on, off when “INS”)

When the variation stage is connected as a system effect (page 87), this parameter adjusts the level of the signal sent to the VL70-m variation effect stage. The higher the value, the higher the level of the variation send signal. When the variation stage is connected as an “insertion” effect (page 86), this parameter turns variation send “on” or “off”.

NoteSft (Note Shift)

Settings: -24 … 0 … +24

Transposes the pitch of the current voice down or up in semitone steps over a ± 2 octave range. “+00” corresponds to standard pitch. Each increment corresponds to a semitone. A setting of “-12”, for example, transposes the pitch down one octave.

The VL-XG PLAY Mode 39