The Reverb Parameters

The reverb effects are essential to give your sound ambience and a sense of dimension, adding warmth and depth to an otherwise dry sound.

Type

•Reverb Type

•Settings: NO EFFECT, HALL 1, HALL 2, ROOM 1, ROOM 2, ROOM 3, STAGE 1, STAGE 2, PLATE, WHITE ROOM, TUNNEL, CANYON, BASEMENT

Selects the reverb type, or “NO EFFECT” if no reverb effect is required. Refer to the separate “List Book” for brief descriptions of each of the reverb types.

Type-Specific Reverb Parameters

•See separate “List Book”

Each of the reverb types, selected via the “Type” parameter, above, has a different set of parameters that specify the actual reverb sound. Refer to the separate “List Book” for information on the individual parameters for each reverb type.

Rev Pan

•Reverb Pan

•Settings: L63 … C … R63

Sets the pan position of the reverb sound — i.e. the perceived position of the reverb sound within the stereo sound field. A setting of “L63” sets the reverb sound full left, “R63” sets the sound full right, and “C” places the sound in the center. Intermediate settings pan the reverb sound to corresponding positions in the stereo sound field.

90Effects & Effect Editing