2.Press [ENTER]

Press the [ENTER] button to go to the confirmation/select display for the selected data type.

3.Select “ALL” or a Single Voice for CUSTOM or INTERNL

If you have selected the CUSTOM or INTERNL data type, you can use the VALUE [-] and [+] buttons at this point to specify whether you want to transmit “ALL” voices from the CUSTOM or INTERNAL bank, or a single voice: when the CUSTOM data type is specified select “C1” through C6, or when the INTRNL data type is specified select “I01” through “I64”.

4.Press [ENTER] to Dump

Press the [ENTER] button to begin actual data transmission (or [EXIT] to abort). “Transmitting” will appear on the display while the data is being transmitted, then the display will return to the data type menu.

5.Exit When Done

Press the [EXIT] button to return to the UTILITY mode menu, or [PLAY] to return directly to the PLAY mode when done.

The Utility Mode 101