Accessing & Editing the Control Parameters

The CONTROL EDIT mode can be accessed from the VOICE PLAY mode as follows:

1.Press [EDIT]

Press the [EDIT] button to go to the VOICE EDIT sub-mode menu.

2.Select the CONTROL Sub-mode

Use the SELECT [<] and [>] buttons to select the CONTROL sub-mode, if necessary. The icon to the left of “CONTROL” on the display will flash when the CONTROL sub-mode is selected.

3.Press [ENTER]

Press the [ENTER] button to go to the CONTROL EDIT mode. “CONTROL EDIT” will appear at the top of the display along with the number of the currently selected control parameter.

4.Select a Parameter

Use the SELECT [<] and [>] buttons to select the parameter you want to edit (see “The Control Edit Parameters”, below). The name of the currently selected parameter and its current setting appear on the second line of the display. An arrow to the left and/or right of the parameter name/value indicates that the SELECT [<] and/or [>] buttons can be used to select more parameters in the indicated direction.

5.Edit the Selected Parameter

Use the VALUE [-] and [+] buttons to set the value of the selected parameter as required.

46Controllers & Control Editing