DevNo. (Device Number)

Settings: 001 … 016, all

The Device Number parameter must be set properly when you want to transmit or receive MIDI system exclusive data to or from another VL70-m or other MIDI device (system exclusive data includes voice parameters, system setup param- eters, etc). The VL70-m Device number must be set to the same number as the Device Number of the external device. Select a device number from “001” to “016”, or “all”. When “all” is selected, MIDI system exclusive data can be received on all device numbers, but transmission occurs via device number 001.

(Bank Number)

Settings: Pr1, Pr2, Cst, Int

Selects the VL70-m PRESET 1 (Pr1), PRESET 2 (Pr2), CUSTOM (Cst), or INTERNAL (Int) voice bank (see “Voice Organization” on page 26).

(Program Number)

Settings: 001 … 128

Selects the voice to played on the VL70-m. The PRESET 1 and PRESET 2 banks each have voice numbers from “001” to “128”, while the INTERNAL bank has voice numbers from “001” to “064”, and the CUSTOM bank has voice numbers from “001” to “006”.

Volume

Settings: 000 … 127

Sets the volume of the current voice. The higher the value the louder the volume.

Pan

Settings: Rnd, L63 … C … R63

Sets the pan position of the current voice — i.e. the position of the voice between left and right in the stereo sound field. A setting of “L63: sets the pan position full left, “C” sets the pan at center, and “R63” sets the pan full right. In between settings produce corresponding intermediate pan positions. The “Rnd” setting produces a randomly- generated pan position.

RevRtn (Reverb Return)

Settings: 000 … 127

Adjusts the level of the signal returned from the VL70-m reverb effect stage. The higher the value, the higher the level of the reverb signal.

32The VOICE PLAY Mode