Accessing & Editing the Effect Parameters

The EFFECT sub-modes — REV, CHO, VAR, and DIST — and the parameters they contain can be accessed from the PLAY mode as follows:

1.Press [EFFECT]

Press the [EFFECT] button to go to the EFFECT sub-mode menu.

2.Select the Desired Sub-mode

Use the SELECT [<] and [>] buttons to select the REV (reverb), CHO (chorus), VAR (variation), or DIST (distortion) sub-mode. The icon to the left of the name of the selected sub-mode will flash when the corresponding sub-mode is selected.

3.Press [ENTER]

Press the [ENTER] button to go to the selected sub-mode. “REVERB EDIT”, “CHORUS EDIT”, “VARIATION EDIT”, or “DISTORTAION EDIT” will appear at the top of the display, depending on the selected sub- mode.

4.Select a Parameter

Use the SELECT [<] and [>] buttons to select the parameter you want to edit (see the parameter descriptions, below). The name of the currently selected parameter and its current setting appear on the second line of the display. An arrow to the left and/or right of the parameter name/value indicates that the SELECT [<] and/or [>] buttons can be used to select more parameters in the indicated direction.

5.Edit the Selected Parameter

Use the VALUE [-] and [+] buttons to set the value of the selected parameter as required.

88Effects & Effect Editing