Accessing & Editing the Filter & EG Parameters

The FILTER & EG EDIT mode can be accessed from the PLAY mode as follows:

1.Press [EDIT]

Press the [EDIT] button to go to the EDIT sub-mode menu.

2.Select the FIL&EG Sub-mode

Use the SELECT [<] and [>] buttons to select the FIL&EG sub-mode, if necessary. The icon to the left of “FIL&EG” on the display will flash when the FIL&EG sub-mode is selected.

3.Press [ENTER]

Press the [ENTER] button to go to the FILTER & EG EDIT mode. “FIL&EG EDIT” will appear at the top of the display along with the number of the currently selected control parameter.

4.Select a Parameter

Use the SELECT [<] and [>] buttons to select the parameter you want to edit (see “The Filter & EG Edit Parameters”, below). The name of the currently selected parameter and its current setting appear on the second line of the display. An arrow to the left and/or right of the parameter name/value indicates that the SELECT [<] and/or [>] buttons can be used to select more parameters in the indicated direction.

Filter & Envelope Generator Editing 67