Error Messages
When an operational error or other problem occurs, the
following error messages to inform you of the problem.
Battery Low!
The internal backup battery needs to be replaced. Have the battery replaced by qualified Yamaha service personnel.
Illegal Data!
A data error has occurred durinng MIDI data reception. Try receiving the data again.
MIDI Buffer Full!
The MIDI receive buffer is full. Reduce the amount of data being transmitted to the
HOST is Offline!
The cable connection to the host computer has been broken, or the computer power is off. Also check for proper operation of the computer driver and MIDI application software.
SysEx Adrs ERROR!
The received system exclusive message address is wrong.
SysEx Data ERROR!
The received system exclusive message data is wrong.
SysEx Size ERROR!
The received system exclusive message size is wrong.
Check Sum ERROR!
An error has been detected in the received MIDI data. Check the transmitting device, MIDI cables, MIDI data and Check Sum, and try again.
This Parameter isn’t Excl Data
The parameter selected for viewing using the Show Exclusive function can not be controlled via system exclusive data.
No Parameter
The parameter selected for viewing using the Show Exclusive or Show Control Change function is not available.
Rcv CH is OFF!
Since the part receive channel for the parameter selected via the Show Control Change function is turned off, the corresponding MIDI data could not be received. Set an appropriate receive channel.
112Appendix