ZyXEL Communications P-202 manual FTP Example, Using FTP client software

Prestige 201 ISDN Access Router

Step 5. Use the command “put” to transfer files between the Prestige and the workstation. The file name for the firmware is “ras” and for the configuration file “rom-0” (rom-zero, not capital o).

Connected to 480.x.x.x

220 P201 FTP version 1.0 ready at Thu Jan 8 18:00:02 1970 User (201.x.x.x:(none)): <Enter>

331 Enter PASS command Password:

230 Logged in ftp> bin ftp> ha

200 Type I OK

ftp> put rasp201.bin ras 200 Port command okay

150 Opening data connection for STOR ras

226 File received OK

ftp: 327680 bytes sent in 1.10Seconds 297.89Kbytes/sec. ftp> quit

Figure 10-11 FTP Example

The system reboots after a successful upload.

Using FTP client software

Step 1. Rename the local firmware and configuration files to 'ras' and 'rom-0', because we can not specify the remote file name in the FTP client software.

Step 2. Use FTP client from your workstation to the Prestige 480 and log in by entering the IP address of the Prestige.

Step 3. Set the transfer type to 'Auto-Detect'or 'Binary'.

Figure 10-12 Edit Host

10-10 Backup, Restore and Upload