Prestige 201 ISDN Access Router
To configure an IP static route, use Menu 12 - IP Static Route Setup, as displayed below.
Menu 12 - IP Static Route Setup
1.________
2.________
3.________
4.________
5.________
6.________
7.________
8.________
Enter selection number:
Figure 5-2 Menu 12 - IP Static Route Setup
From Menu 12, select one of the available IP static routes to open Menu 12.1 - Edit IP Static Route, as shown next.
Menu 12.1 - Edit IP Static Route
Route #: 1
Route Name= ?
Active= No
Destination IP Address= ?
IP Subnet Mask= ?
Gateway IP Address= ?
Metric= 2
Private= No
Press ENTER to Confirm or ESC to Cancel:
Figure 5-3 Edit IP Static Route
Table 5-1 Edit IP Static Route Menu Fields
Field
Description
Route Name | Enter a descriptive name for this route. This is for identification purpose only. |
|
|
Active | This field allows you to activate/deactivate this static route. |
|
|
Destination IP Address | This parameter specifies the IP network address of the final destination. |
| Routing is always based on network number. If you need to specify a route to a |
| single host, use a subnet mask of 255.255.255.255 in the subnet mask field to |
| force the network number to be identical to the host ID. |
|
|
IP Subnet Mask | Enter the subnet mask for this destination. Follow the discussion on IP subnet |
| mask in this chapter. |
|
|
Static Route Setup |
