|
| Prestige 201 ISDN Access Router | |
|
|
|
|
| Field | Description |
|
| PABX Number (Include | The PABX number is used for an outside loopback test when the ISDN PABX |
|
| S/T Bus Number) | cannot support a local loopback test. If the Prestige is connected to an ISDN |
|
|
| PABX enter this number. Note that this number is used exclusively for |
|
|
| loopback testing; for regular outgoing calls, the Prestige dials the phone |
|
|
| number in the remote node. If this field is blank it indicates either that the |
|
|
| PABX supports local loopback testing or that the Prestige is not connected to a |
|
|
| PABX. |
|
| Outgoing Calling Party |
|
|
| Number |
|
|
| ISDN Data | If this field is not blank, the Prestige will use its value as the calling party |
|
|
| number for "ISDN Data" outgoing calls. Otherwise, the individual entry for |
|
|
| "ISDN Data" in Menu 2.1 will be used as the calling party number. You only |
|
|
| need to fill in this field if your switch or PABX requires a specific calling party |
|
|
| number for outgoing calls; otherwise, leave it blank. |
|
| Data Link Connection | Use the space bar to choose either ISDN |
|
|
| multipoint data link connection. The default is |
|
|
| Note: You must have obtained the data link connection mode supported by |
|
|
| your Telco when subscribing for the ISDN line. If not, ask your Telco and |
|
|
| select the supported mode here. |
|
The following diagram illustrates the PABX Number (with S/T Bus Number) for Loopback and Outgoing Calling Party Number fields for a Prestige behind an ISDN PABX.
Figure 2-11 Prestige behind a PABX
Hardware Installation & Initial Setup |
