ZyXEL Communications P-202 manual Navigating the SMT Interface, Main Menu Commands

Prestige 201 ISDN Access Router

2.6Navigating the SMT Interface

The SMT (System Management Terminal) is the interface that you use to configure your Prestige.

Several operations that you should be familiar with before you attempt to modify the configuration are listed in the table below.

Table 2-2 Main Menu Commands

Operation	Press/<read>	Description
Move forward to	[ENTER]	To move forward to another menu, type in the number of the
another menu		desired menu and press [ENTER].
Move backward to	[ESC]	Press the [ESC] key to move back to the previous menu.
a previous menu
Move to a	Press the	Fields beginning with “Edit” have a default setting of No. Press the
submenu	[Space bar] to	[Space bar] to change No to Yes, then press [ENTER] to go to a
	change No to	submenu.
	Yes then press
	[ENTER].
Move the cursor	[ENTER] o r	Within a menu, press [ENTER] to move to the next field. You can
	[Up]/[Down]	also use the [Up]/[Down] arrow keys to move to the previous and
		the next field, respectively.
	arrow keys
Enter information	Fill in, or	You need to fill in two types of fields. The first requires you to type
	Press the	in the appropriate information. The second allows you to cycle
		through the available choices by pressing the [Space] bar.
	[Space bar] to
	toggle
Required fields	<?>	All fields with the symbol <?> must be filled in order be able to save
		the new configuration.
N/A fields	<N/A>	Some of the fields in the SMT will show a <N/A>. This symbol
		refers to an option that is Not Applicable.
Save your	[ENTER]	Save your configuration by pressing [ENTER] at the message
configuration		[Press ENTER to confirm or ESC to cancel]. Saving the data on the
		screen will take you, in most cases to the previous menu.
Exit the SMT	Type 99, then	Type 99 at the Main Menu prompt and press [ENTER] to exit the
	press [ENTER].	SMT interface.

Hardware Installation & Initial Setup 2-5