Prestige 201 ISDN Access Router
| Operation field. |
Start IP | Refers to the first IP address of a group of NetCAPI clients. Each group contains |
| contiguous IP addresses. |
End IP | Refers to the last IP address in a NetCAPI client group. |
Operation | Press the [Spacebar] to select Incoming if you wish to grant incoming calls permission. |
| Select Outgoing if you wish to grant outgoing calls permission. Select |
| Both if you wish to grant both incoming calls and outgoing calls permissions. Select |
| None if you wish to deny all calls. |
2.11 Ethernet Setup
This section describes how to configure the Ethernet using Menu 3 – Ethernet Setup. From the Main Menu, enter 3 to open Menu 3.
Menu 3 - Ethernet Setup
1.General Setup
2.TCP/IP and DHCP Setup
Enter Menu Selection Number:
Figure 2-15 Menu 3 - Ethernet Setup
2.11.1 General Ethernet Setup
This menu allows you to specify filter set(s) that you wish to apply to the Ethernet traffic. You seldom need to filter Ethernet traffic; however, the filter sets may be useful to block certain packets, reduce traffic and prevent security breaches.
Hardware Installation & Initial Setup |
