Prestige 201 ISDN Access Router
8.4Boot module commands
Prestige boot module commands are shown below. For ATBAx, x denotes the number preceding the colon to give the console port speed following the colon in the list of numbers that follows; e.g. ATBA3 will give a console port speed of 9.6 Kbps. ATSE displays the seed that is used to generate a password to turn on the debug flag in the firmware. The ATSH command shows product related information such as boot module version, vendor name, product model, RAS code revision, ISDN code revision, etc.
======= Debug Command Listing =======
ATHE | print help |
ATGO | boot system |
ATUR | upload RAS code |
ATLC | upload RAS configuration file |
ATBAx | change baud rate. 1:38.4,2:19.2,3:9.6,4:57.6,5:115.2 |
ATTD | download configuration to PC |
ATSE | display seed for password generation |
ATSH | display Revision and etc |
Figure 8-12 Boot module commands
8.5Command Interpreter Mode
This option allows you to enter the command interpreter mode. A list of valid commands can be found by typing [help] at the command prompt. For more detailed information, check the ZyXEL Web site or send e- mail to the ZyXEL Support Group.
|
| Enter Menu Selection Number: 8 |
| |
Copyright (c) 1999 ZyXEL Communications Corp. |
|
| ||
ras> ? |
|
|
|
|
Valid commands are: |
|
|
| |
sys | exit | device | ether |
|
isdn | ip | ppp | hdap |
|
dcp |
|
|
|
|
|
|
|
|
|
Figure 8-13 Command mode
System Maintenance |
