
Prestige 201 ISDN Access Router
| Table | |
Field |
| Description |
|
|
|
ISP’s Name |
| Enter the name of your Internet Service Provider, e.g., myISP. |
|
| This information is for identification purposes only. |
|
| |
Pri Phone and Sec | Both the Primary and the Secondary Phone numbers refer to the | |
Phone Number |
| number that the Prestige dials to connect to the ISP. |
|
| |
My Login Name | Enter the login name given to you by your ISP. | |
|
|
|
My Password |
| Enter the password associated with the login name above. |
|
| |
Single User Account | Please see the following section for a more detailed discussion | |
|
| on the Single User Account feature. The default is Yes. |
|
|
|
Telco | Transfer | This field specifies the type of connection between the Prestige |
options : | Type | and this remote node. Select 64K, or Leased. |
|
|
|
Multilink |
| The Prestige uses the PPP Multilink Protocol (PPP/MP) to |
|
| bundle multiple links in a single connection to boost the effective |
|
| throughput between two nodes. |
|
|
|
Idle Timeout |
| This value specifies the number of idle seconds that elapses |
|
| before the remote node is automatically disconnected. Idle |
|
| seconds is the period of time when no data is transmitted from |
|
| your Prestige. The default is 100 seconds. |
|
|
|
At this point, the SMT will ask if you wish to test the Internet connection. If you select Yes, your Prestige will call the ISP to test the Internet connection. If the test fails, note the error message that you receive on the screen and take the appropriate troubleshooting steps.
Internet Access |